ASME Virtual Classroom

Today’s Engineering Professional: Workplace Skills Bootcamp

Product Number: VCPD844

ASME offers a seven-day Bootcamp utilizing an immersive approach that develops in-demand professional skills to advance your career. This is an interactive class where learners collaborate with their colleagues, work on real-world projects, and utilize engineering-specific case studies and applications.

Schedule : This course is offered over the following seven days: April 19-22 and May 3-5, 2021; from 9:30 AM to 1:30 PM and 2:00 PM to 6:00 PM Eastern each day, with breaks scheduled throughout.

Enroll now to save 22%

$3,595 $2,795

Browse Virtual Classrooms by Code

Click codes below to expand

ASME B31 (3 classes)

ASME B31.8 Gas Transmission & Distribution Piping Systems

This course explains the present-day piping Code provisions, the principal intentions of the Code, and how the Code should be used. The emphasis is on transmission pipelines.
Length: 3 days CEUs: 2.30 PDHs: 23.00

ASME B31.3 Process Piping Design

The objective of this intensive course is to examine how various stakeholders, (including designers, manufacturers, owners, suppliers, fabricators, and erectors) employ the ASME B31.3 Code requirements to prevent piping system failures.

Length: 5 half-days CEUs: 2.00 PDHs: 20.00

ASME B31.3 and B31.1 Practical Piping Design for Process and Power Applications

Learn more about the requirements of B31.3 and B31.1 for design, analysis, materials, fabrication, testing, and inspection of process and power piping systems.

Length: 6 half-days CEUs: 3.00 PDHs: 30.00

ASME BPVC Sections I, IV, VI, VII, and VIII (6 classes)

ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels

Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of ASME B&PVC, Section VIII, Division 1.
Length: 5 half-days CEUs: 2.30 PDHs: 23.00

Overview of In-service Codes for Inspections, Repairs and Alterations of Pressure Equipment

This course is a comprehensive introduction to the requirements of various codes and standards, regarding inspection, repairs and alterations of pressure equipment, and in particular, pressure vessels.
Length: 4 half-days CEUs: 1.50 PDHs: 15.0

ASME BPV Code, Section VIII, Division 1: Combo Course

Save up to $685 when you take ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels and Overview of In-service Codes for Inspections, Repairs and Alterations of Pressure Equipment in this back-to-back session.
Length: 8 half-days CEUs: 3.80 PDHs: 38.00

Boilers and Fired Pressure Equipment Operation and Maintenance

This course provides a broad scope of boiler (fired & unfired) and fired pressure equipment operation and maintenance, covering requirements of ASME B&PVC Sections I, III, IV, VI, VII, and VIII, and covers API recommendations to reflect the current changes to the industry's practices.

Boilers and Fired Pressure Equipment Inspection, Repairs, and Alterations

This course has been designed to provide participants with comprehensive knowledge of boiler and fired pressure equipment inspection requirements from NB23, ASME POM 101, ASME POM 102, ASME Section VI, ASME Section VII, and API RP 573.

Boiler Combo Course: Operation, Maintenance, Inspection, Repairs, and Alterations

Save up to $685 when you take Boilers and Fired Pressure Equipment Operation and Maintenance and Boilers and Fired Pressure Equipment Inspection, Repairs, and Alterations in this back-to-back session.

ASME Section IX (1 class)

ASME BPV Code, Section IX: Welding, Brazing and Fusing Qualifications

This is a fundamental course that trains participants to comply with the requirements of ASME BPV Code Section IX, Welding, Brazing and Fusing Qualifications.
Length: 4 days CEUs: 2.30 PDHs: 23.00

API 579-1/ASME FFS-1 (1 class)

API 579-1/ASME FFS-1 Fitness-For-Service Evaluation

This course helps participants understand and apply the API/ASME fitness-for-service standard in their daily work.
Length: 4 days CEUs: 2.30 PDHs: 23.00

Browse Virtual Classrooms by Category

Click categories below to expand

Piping (6 classes)

ASME B31.3 and B31.1 Practical Piping Design for Process and Power Applications

Learn more about the requirements of B31.3 and B31.1 for design, analysis, materials, fabrication, testing, and inspection of process and power piping systems.

Length: 6 half-days CEUs: 3.00 PDHs: 30.00

ASME B31.3 Process Piping Design

This introductory course trains participants on the requirements of the ASME B31.3 Code, including design, analysis, materials, fabrication, testing and inspection of process piping systems.

Length: 5 half-days CEUs: 2.00 PDHs: 20.00

Fundamentals of Pumps and Valves and Their Selection for Optimum System Performance

This course discusses the requirements necessary for the selection of pumps and valves. It is structured in a sequence, starting from basics to detailed discussion of various aspects of both pumps and valves.

Length: 8 half-days CEUs: 3.00 PDHs: 30.00

Flow-Induced Vibration with Applications to Failure Analysis

Learn practical applications of the latest design and analysis tools for the prediction and prevention of vibration in structures exposed to high energy fluid flow.

Length: 3 days CEUs: 2.30 PDHs: 23.00

Pipe Sizing, Pipe Wall Stresses and Water Hammer

This course provides students with a thorough overview of pipe sizing, water hammer, unsteady flows, and more importantly the solutions to prevent or mitigate pipe wall stresses.
Length: 8 half-days CEUs: 3.00 PDHs: 30.00

Failure Prevention, Fitness-for-Service, Repair and Life Extension of Piping, Vessels and Tanks

Learn to assess fitness-for-service and make run-or-repair decisions on aging pressure equipment based on API 579-1/ASME FFS-1, ASME PCC-2 and other standards.
Length: 5 days CEUs: 2.00 PDHs: 20.00

Boiler & Pressure Vessels (6 classes)

ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels

Overview of In-service Codes for Inspections, Repairs and Alterations of Pressure Equipment

ASME BPV Code, Section VIII, Division 1: Combo Course

This course is a back-to-back offering of ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels and Overview of In-service Codes for Inspection, Repairs, and Alterations of Pressure Equipment.
Length: 5 days

Failure Prevention, Repair and Life Extension of Piping, Vessels and Tanks

Learn to assess fitness-for-service and make run-or-repair decisions on aging pressure equipment based on API 579-1/ASME FFS-1, ASME PCC-2 and other standards.

Length: 4 days CEUs: 2.30 PDHs: 23.00

API 579-1/ASME FFS-1 Fitness-For-Service Evaluation

This course helps participants understand and apply the API/ASME fitness-for-service standard in their daily work.
Length: 4 days CEUs: 2.30 PDHs: 23.00

Pressure Relief Devices: Design, Sizing, Construction, Inspection and Maintenance

Learn more about requirements for pressure relief devices in various codes, including: ASME Section I, ASME Section III, ASME Section IV, ASME Section VIII, ASME Section XII, B31.1, and B31.3.
Length: 4 days CEUs: 2.30 PDHs: 23.00

Welding, Brazing & Fusing (2 classes)

Practical Welding Technology

This course employs in-class exercises to reinforce class lectures on the subjects of welding and NDE symbols, carbon equivalence, A-numbers, strength of welds, joint details, welding procedures, selection of filler metals, and preheat.
Length: 4 days CEUs: 3.00 PDHs: 30.00

ASME BPV Code, Section IX: Welding, Brazing and Fusing Qualifications

New Course

Today’s Engineering Professional: Workplace Skills Bootcamp

Enroll now to save 22%

$3,595 $2,795

Questions?

American Society for Mechanical Engineers