Learn from Home

Remote learning is here to stay, and ASME’s award-winning educational programming is rising to meet the demands of today’s engineers. Our ever-expanding eLearning portfolios provide training you can trust. Take advantage of on-demand eLearning and Virtual Classrooms built with you—the engineer, the project manager, the business owner—front and center.
 
Find courses on ASME B31.3, ASME Y14.5, ASME BPVC Section VIII, ASME BPVC Section IX, additive manufacturing with metals, and much more below.
lfh-illustration
piping2

Featured e-Learning Course

Practical Piping Design

Learn the history of the ASME B31.3 code and how to apply it today. With this training, you won’t have to rely on piping design software to do the thinking for you.

Silver

Practical Piping Design Course
$795
sign up

Earn up to CEUs: 1.00 / PDHs: 10.00

  • PIP206 - Practical Piping Design
 
 
 
.
 
 

Gold

B31.3 e-learning Combo Course
$895
sign up

Practical Piping Design + Essentials - B31.3 Process Piping Code

Earn up to CEUs: 1.00 / PDHs: 12.00

  • PIP206 - Practical Piping Design
  • ZABC15 - Essentials - B31.3 Process Piping Code
 
 

Platinum

B31.3 Professional Package
$2875
sign up

Full suite of Practical Piping Design and ASME B31.3 Process Piping courses – enables you to become professional grade

Earn up to CEUs: 4.00 / PDHs: 42.00

  • PIP206 - Practical Piping Design
  • ZABC15 - Essentials - B31.3 Process Piping Code
  • VCPD643 - B31.3 Process Piping Virtual Classroom Training Session
ASME Virtual Classroom
The best engineering training you can get. No masks required.
 
Find courses on ASME B31.3, ASME Y14.5, ASME BPVC Section VIII, ASME BPVC Section IX, and much more below.

Piping (ASME B31.3 & more)

Geometric Dimensioning & Tolerancing (ASME Y14.5)

Boiler & Pressure Vessel (ASME BPVC-VIII)

View all Virtual Classrooms

Practical Piping_hero
enroll now
ASME B31.3 Process Piping Code
This introductory course trains participants on the requirements of the ASME B31.3 Code, including design, analysis, materials, fabrication, testing and inspection of process piping systems.
 
Sign up for the next session:
December 7 - 11. 10:30 AM EST - 5:30 PM EST. 
who should take
enroll now
Failure Prevention, Fitness-for-Service, Repair and Life Extension of Piping, Vessels and Tanks
Learn to assess fitness-for-service and make run-or-repair decisions on aging pressure equipment based on API 579-1/ASME FFS-1, ASME PCC-2 and other standards.
 
Sign up for the next session:
November 16 - 19. 9:00 AM EST - 3:00 PM EST.
Body-04
enroll now
Flow-Induced Vibration with Applications to Failure Analysis
Learn practical applications of the latest design and analysis tools for the prediction and prevention of vibration in structures exposed to high energy fluid flow.
 
Sign up for the next session:
December 7 - 9. 10:30 AM EST - 6:30 PM EST. 
image-NM.1-cover
Drive confidence in your entire piping system with ASME's new Nonmetallic Pressure Piping System Standards
 
ASME’s latest nonmetallic (NM) pressure piping system standards are educating professionals on how to safely design, manufacture, fabricate, install, inspect, examine and test pressure piping and associated components along with entire pressure piping systems.
learn more
Y14-GeometricDimensioning-Hobspot-1920
enroll now
Geometric Dimensioning and Tolerancing Fundamentals 1
This official ASME introductory geometric dimensioning and tolerancing (GD&T) course trains participants to read engineering drawings and interpret design intent per the latest version of ASME Y14.5.
 
Sign up for the next session:
Days 1 & 2: November 30 - December 1. 10:30 AM EST - 5:30 PM EST.
Day 3: December 2. 10:30 AM EST - 1:30 PM EST.
LD-2020-GDT-1920
enroll now
Geometric Tolerancing Applications and Tolerance Stacks
This official ASME GD&T applications and tolerance stacks course will train participants to how to apply GD&T to their designs and perform tolerance stacks through authentic case studies
 
Sign up for the next session:
Day 1: December 2. 2:30 PM EST - 5:30 PM EST.
Days 2 & 3: December 3 - 4. 10:30 AM EST - 5:30 PM EST.
Take these courses together to save up to $995!
learn more
LD-2020-Boilers-1920
enroll now
ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels
Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of ASME B&PVC, Section VIII, Division 1.
 
Sign up for the next session:
November 16 - 18. 10:30 AM EST - 6:30 PM EST. 
BPVC-Boilers-Hubspot-1920
enroll now
Overview of In-service Codes for Inspections, Repairs and Alterations of Pressure Equipment
This course is a comprehensive introduction to the requirements of various codes and standards, regarding inspection, repairs and alterations of pressure equipment, and in particular, pressure vessels.
 
Sign up for the next session:
November 19 - 20. 10:30 AM EST - 6:30 PM EST. 
Take these courses together to save up to $685!
learn more
AM_bg

New!

Additive Manufacturing

Virtual Classrooms & On-Demand eLearning

learn more
On-Demand eLearning
Drawing Interpretation

Learn more about basic drawing elements, part views, section views, general dimensions, tolerances, finish & welding symbols and more.

Enroll Now

The Bolted Joint

Learn the fundamentals of bolts and bolted joints, including their strength, behavior, design approaches and failure prevention.

Enroll Now

Introduction to Geometric Dimensioning & Tolerancing (GD&T) – Y14.5

Designed for those who use the ASME Y14.5 Dimensioning and Tolerancing standard, this course covers most of the geometric dimensioning controls used on mechanical engineering drawings.

Enroll Now

Introduction to Finite Element Analysis

In this course you will learn all the steps necessary to conduct a successful FEA, including how to use finite element software for more advanced structural, thermal analysis and basic modal analysis.

Enroll Now

Advanced Geometric Dimensioning and Tolerancing (GD&T) - Y14.5

This advanced course thoroughly covers popular geometric dimensioning controls and gets into more advanced topics like coaxial relationships and control of rectangular features.

Enroll Now

Advanced Finite Element Analysis

Based on practical application of Abaqus software, this course builds on the introductory level course to provide a fuller appreciation of how Abaqus works as well as FEA in general.

Enroll Now

Bolting Specialist Qualification Program

Learn the principles and practices of safe bolted joint assembly as outlined in Appendix A of ASME PCC-1: Guidelines for Pressure Boundary Bolted Flange Joint Assembly.

Enroll Now

Principles of Welding

Learn more about fundamental steel metallurgy, residual stress & distortion, welding processes, materials (ferrous, non-ferrous, etc.), joint types, weld types, and much more

Enroll Now

ASME BPV Code, Section IX: Welding & Brazing Qualifications

Modules in this course include: code basics, welding process basics, metallurgy & welding, WPS Qualification Variables for SMAW, developing a WPS, qualifying welding personnel, notch-toughness and much more

Enroll now

Two Phase Flow and Heat Transfer

Modules in this course include: phase change principles & fundamentals of boiling; condensation on external surfaces; special topics such as critical heat flux, flow instability, and much more.

Enroll now

Introduction to Computational Fluid Dynamics

Learn how to set up, run and interpret the results of CFD models for eight different case studies from ANSYS Fluent®.

Enroll now

Heating, Ventilation, and Air-Conditioning

Learn more about the general principles of HVAC, including psychrometrics, sensible heating and cooling, dehumidification and humidification, the adiabatic mixing process, air washers, and much more.

Enroll now

Hydraulic Design of Liquid or Water Piping Systems

Learn the basic principles that govern the flow of fluids in pipes, including calculations for various aspects of piping systems, pressure drop, flow resistance, and much more.

Enroll now

Basic Gas Turbine Engine Technology

This course offers a non-mathematical approach to understanding the fundamental nature of gas turbine engines and the processes that affect their performance.

Enroll now

Compressors and Process Fit for Mechanical Engineers

This online, instructor-supported course will help to improve the ability of the mechanical engineer to assess existing equipment and specify the proper centrifugal compressor for a given application.

Enroll now

Hydraulic Design of Gas or Vapor Systems

This course presents the fundamentals for the design of gas or vapor piping systems. It covers the basic principles that govern fluid flow in these piping systems, including how to apply Bernoulli's theorem and much more.

Enroll now

ASME BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels

This course provides an overview of code organization, including updated editions, and expert instruction on how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code Revision.

Enroll now

Overview of In-service Codes for Inspection, Repairs and Alterations of Pressure Equipment

This course is a comprehensive introduction to the requirements of various codes and standards, regarding inspection, repairs and alterations of pressure equipment, and in particular, pressure vessels.

Enroll now

Project Management for Engineers

Identify the project management skills that you already have and the ones that you need to enhance; learn how to use a step-by-step process to plan, implement and evaluate projects; and much more.

Enroll now

Developing Products

This course for engineering managers responsible for product development covers the project life cycle, determining resource requirements, detailed planning, and management of the design process.

Enroll now

Probabilistic Risk Assessment

Learn more about PRA Standard compliance, the interaction between technical requirements of the PRA Standard and the applications of PRA, and more.

Enroll now

Gerencia de Proyectos para Ingenieros, Profesionales y Técnicos

Enroll n0w

Gerencia de Proyectos de Mantenimiento

Enroll now

Gestión y Optimización de Inventarios en Mantenimiento

Enroll now

Análisis Vibracional en Equipos Rotativos y Mantenimiento Predictivo - Nivel I

Enroll now

Código ASME Sección VIII Div. 1 Diseño, Construcción e Inspección de tanques y recipientes de presión

Enroll now

Gestión de Integridad de Recipientes, Calderas y Tuberías a Presión

Enroll Now

Selección y cálculo de dispositivos de alivio de presión según ASME I, VIII y PTC 25

Enroll now

ASME BPV Code, Section VIII, Division 2: Design & Fabrication of Pressure Vessels

This course presents background for the alternative rules for the design and fabrication of pressure vessels given in BPVC-VIII-2, introduces Class 1 and Class 2 vessel types, and much more.

Enroll now

Inspección Basada en Riesgo I - Un Sistema Integrado de Análisis de Riesgo, Aptitud para el Servicio y Análisis de Fallas

Enroll now

Mantenimiento Centrado en Confiabilidad - MCC

Enroll now

Análisis de Fallas Mecánicas en Equipos Mineros

Enroll now

El Análisis de Riesgos y las Tecnologias del Mantenimiento Predictivo

Enroll now

Introducción a la Tecnología de Soldadura

Enroll now

Código ASME Sección IX - Soldadura: Desarrollo y calificación de Procedimientos y Soldadores

Enroll now

Soldadura de Oleoductos, Gasoductos y otras Tuberías según API 1104

Enroll now

Código ASME B31.1 Tuberías de Vapor y Sistemas de Potencia

Enroll now

Código ASME B31.8 Tuberías de Transporte y Distribución de Gas

Enroll now

Código ASME B31.4 Tuberías de Transporte de Hidrocarburos líquidos y otros líquidos

Enroll now

Selección y Cálculo de Dispositivos de Alivio de Presión y Vacío Según API 520 / 521/ 2000

Enroll now

Optimización energética de sistemas de aire comprimido bajo el estándar ASME EA 4-2010

Enroll now

abstract

Save your budget when you get training for a team of 20 or more

Need training for a group? Fill out this form and an ASME Learning & Development representative will contact you to discuss your customized training package.